Black pendant light vintage, Marjet

This black pendant light vintage, Marjet, has the following features:
• 28 cm long and 150 cm high
• 3 x E27 lamp holder (excl. light bulbs)
• Black

Not Available

€109.00

webshop keurmerk

Description

The black pendant light Marjet has the style vintage and is made of metal. This vintage pendant light has 3 E27 lamp holders and is supplied excluding 3 light sources. The lamp can accommodate light sources with a maximum power of 40 watts per bulb.

Dimmable pendant light

It is possible to dim the black pendant light in two ways. You can choose a dimmable light source together with a LED dimmer (not included) or you can choose to dim the vintage pendant light with a smart LED light bulb. A Smart WiFi light source is dimmable with an app on your phone or tablet, this way you do not need to install a LED dimmer.

Specifications

Maximum wattage	40
Supply voltage	220-240V
Number of lights	3
Lampholder type	E27
Light included	No
Length in cm	28
Height in cm	150
Weight in KG	2.02
Dimmable	Yes (not included)
Warranty	2 years
IP classification	IP20 (dustproof)
Colour	White, Black
Material	Metal
Style	Vintage
Article number	Q52316

Shortening the Pendant Light

You can easily shorten the cord by pulling it through the ceiling cap. First, calculate at what height you want to hang the pendant light.

The average height for a pendant light above a dining table is approximately 150-160 cm, measured from the floor to the bottom of the shade. If the ceiling is 250 cm high, you will have 90 cm left for the lamp and cord. From these 90 centimetres, subtract the size of the lampshade to determine the length of the cord. Another guideline is that the distance between the table and the lamp should be 60-70 cm. Once you have determined the correct length, mark the desired length (measured from the bottom). Cut the cord to this line.

Pull the cord through until you see the length marking you have set. The excess cord can be coiled and secured with a piece of tape. This way, you can neatly tuck the excess cord into the ceiling cap.