White dining table hanging lamp design, Vikash, 32W, 4000K LED, 3-step dimmable

This white dining table hanging lamp design, Vikash, has the following features:
• 45 cm long, 83 cm wide and 150 cm high
• 4000K LED 32W
• White

Delivery time: 5-8 working days

RRP: €149.00

€149.00

The RRP is the price recommended by the manufacturer

webshop keurmerk

Description

The white dining table hanging lamp Vikash has the style design and is made of metal. This design dining table hanging lamp is equipped with integrated LED light. The integrated LED lighting has a power of 32 watt and the light colour 4000K (white). This is a clear and neutral white light colour.

3-step dimmable pendant light

It is possible to dim this pendant light since it is 3-step dimmable, meaning you can set the lamp to 3 light modes (25, 50 or 100%) by means of a switch. The advantage of this feature is that the lamp simply works in combination with your standard switch/light button and you do not have to install an LED dimmer.

Specifications

Maximum wattage	32
Supply voltage	220-240V
Number of lights	1
Number of Lumens	3200
Light colour	4000K (white)
Lampholder type	LED integrated
Lightsource type included	Integrated LED
Light included	Yes, integrated
Length in cm	45
Height in cm	150
Width in cm	83
Dimmable	Yes (included)
Warranty	2 years
IP classification	IP20 (dustproof)
Colour	White
Material	Metal
Style	Design
Article number	Q52223

Shortening the Pendant Light

You can easily shorten the cord by pulling it through the ceiling cap. First, calculate at what height you want to hang the pendant light.

The average height for a pendant light above a dining table is approximately 150-160 cm, measured from the floor to the bottom of the shade. If the ceiling is 250 cm high, you will have 90 cm left for the lamp and cord. From these 90 centimetres, subtract the size of the lampshade to determine the length of the cord. Another guideline is that the distance between the table and the lamp should be 60-70 cm. Once you have determined the correct length, mark the desired length (measured from the bottom). Cut the cord to this line.

Pull the cord through until you see the length marking you have set. The excess cord can be coiled and secured with a piece of tape. This way, you can neatly tuck the excess cord into the ceiling cap.