Plastic pendant light white, Feline

The plastic pendant light white, Feline, has the following properties:
• 124 cm high and 35 cm wide
• 1 x E27 lamp holder (excl. light bulb)
• White

Delivery time: 6-10 working days

RRP: €44.99

€44.99

The RRP is the price recommended by the manufacturer

webshop keurmerk

More items of this Product Range

Plastic pendant light grey, Feline

€44.99

6-10 working days

Description

The white pendant light Feline is made of plastic. The white pendant light is supplied without a light source. In this lamp, a light source with a E27 lamp holder is needed, the maximum wattage of the light source must not exceed 60 watt.

Dimmable pendant light

It is possible to dim the white pendant light in two ways. You can choose a dimmable light source along with a LED dimmer (not included) or you can choose to dim the plastic pendant light with a smart LED light bulb. A Smart LED light bulb is dimmable with an app on your phone or tablet, this way you do not need to install a LED dimmer.

Specifications

Maximum wattage	60
Supply voltage	220-240V
Number of lights	1
Lampholder type	E27
Light included	No
Height in cm	124
Weight in KG	1.077
Diameter in cm	35
Width in cm	35
Dimmable	Yes (not included)
Warranty	2 years
IP classification	IP20 (dustproof)
Colour	White
Material	Metal, Plastic
Area	Dining table, Living room, Hall, Office
Style	Basic
Article number	Q10244

Shortening the Pendant Light

You can easily shorten the cord by pulling it through the ceiling cap. First, calculate at what height you want to hang the pendant light.

The average height for a pendant light above a dining table is approximately 150-160 cm, measured from the floor to the bottom of the shade. If the ceiling is 250 cm high, you will have 90 cm left for the lamp and cord. From these 90 centimetres, subtract the size of the lampshade to determine the length of the cord. Another guideline is that the distance between the table and the lamp should be 60-70 cm. Once you have determined the correct length, mark the desired length (measured from the bottom). Cut the cord to this line.

Pull the cord through until you see the length marking you have set. The excess cord can be coiled and secured with a piece of tape. This way, you can neatly tuck the excess cord into the ceiling cap.