Nickel pendant light modern, Remy, 42W, 3000K LED

This nickel pendant light modern, Remy, has the following features:
• 150 cm high and 62 cm wide
• 3000K LED 42W
• Nickel

Delivery time: 5-8 working days

RRP: €399.00

€399.00

The RRP is the price recommended by the manufacturer

webshop keurmerk

Description

The nickel pendant light Remy has the style modern and is made of metal. This modern pendant light is equipped with integrated LED light. The integrated LED lighting has a power of 42 watt and the light colour 3000K (warm white). This is warm white light that creates a cozy and warm atmosphere.

Dimmable pendant light

It is possible to dim this nickel pendant light. To dim the light you need a dimmable light source and a LED dimmer (not included as standard).

Specifications

Maximum wattage	42
Supply voltage	220-240V
Number of lights	1
Number of Lumens	5100
Light colour	3000K (Warm white)
Lampholder type	LED integrated
Lightsource type included	Integrated LED
Expected burning hours	30000
Light included	Yes, integrated
Height in cm	150
Weight in KG	1.725
Diameter in cm	62
Width in cm	62
Dimmable	Yes (not included)
Warranty	2 years
IP classification	IP20 (dustproof)
Colour	Nickel
Material	Metal
Area	Living room, Bedroom
Style	Modern
Article number	Q25558

Shortening the Pendant Light

You can easily shorten the cord by pulling it through the ceiling cap. First, calculate at what height you want to hang the pendant light.

The average height for a pendant light above a dining table is approximately 150-160 cm, measured from the floor to the bottom of the shade. If the ceiling is 250 cm high, you will have 90 cm left for the lamp and cord. From these 90 centimetres, subtract the size of the lampshade to determine the length of the cord. Another guideline is that the distance between the table and the lamp should be 60-70 cm. Once you have determined the correct length, mark the desired length (measured from the bottom). Cut the cord to this line.

Pull the cord through until you see the length marking you have set. The excess cord can be coiled and secured with a piece of tape. This way, you can neatly tuck the excess cord into the ceiling cap.