Nickel pendant light metal, Casparus

This nickel pendant light metal, Casparus, has the following features:
• 150 cm high and 25 cm wide
• 1 x E27 lamp holder (excl. light bulb)
• Nickel

Delivery time: 5-8 working days

RRP: €59.99

€59.99

webshop keurmerk

More items of this Product Range

Black pendant light metal, Casparus

Special Price €35.99 Regular Price €59.99

In Stock

White pendant light modern, Casparus

€59.99

5-8 working days

Description

The nickel pendant light Casparus is made of metal. This nickel pendant light has a E27 lamp holders and is supplied without a light source. The lamp can accommodate light sources with a maximum power of 40 watts.

Dimmable pendant light

It is possible to dim the nickel pendant light in two ways. You can choose a dimmable light source along with a LED dimmer (not included) or you can choose to dim the metal pendant light with a smart LED light bulb. A Smart LED light bulb is dimmable with an app on your phone or tablet, this way you do not need to install a LED dimmer.

Specifications

Maximum wattage	40
Supply voltage	220-240V
Number of lights	1
Lampholder type	E27
Light included	No
Height in cm	150
Weight in KG	0.98
Diameter in cm	25
Width in cm	25
Dimmable	Yes (not included)
Warranty	2 years
IP classification	IP20 (dustproof)
Colour	Nickel
Material	Metal
Style	Basic
Article number	Q32384

Shortening the Pendant Light

You can easily shorten the cord by pulling it through the ceiling cap. First, calculate at what height you want to hang the pendant light.

The average height for a pendant light above a dining table is approximately 150-160 cm, measured from the floor to the bottom of the shade. If the ceiling is 250 cm high, you will have 90 cm left for the lamp and cord. From these 90 centimetres, subtract the size of the lampshade to determine the length of the cord. Another guideline is that the distance between the table and the lamp should be 60-70 cm. Once you have determined the correct length, mark the desired length (measured from the bottom). Cut the cord to this line.

Pull the cord through until you see the length marking you have set. The excess cord can be coiled and secured with a piece of tape. This way, you can neatly tuck the excess cord into the ceiling cap.