Nickel pendant light glass, Ciuda

This nickel pendant light glass, Ciuda, has the following properties:
• 72 cm long, 10,5 cm wide and 110 cm high
• 3 x E27 lamp holder (excl. light bulbs)
• Nickel

Delivery time: 5-8 working days

RRP: €149.00

€149.00

The RRP is the price recommended by the manufacturer

webshop keurmerk

More items of this Product Range

Nickel pendant light glass, Ciuda

€59.99

5-8 working days

Description

The nickel pendant light Ciuda is made of glass. The nickel pendant light is supplied without light sources with E27 lamp holders. The fixture needs 3 E27 LED light sources with a maximum power of 60 watts per light.

Dimmable pendant light

It is possible to dim the nickel pendant light in two ways. You can choose a dimmable light source along with a LED dimmer (not included) or you can choose to dim the glass pendant light with a smart LED light bulb. A Smart LED light bulb is dimmable with an app on your phone or tablet, this way you do not need to install a LED dimmer.

Specifications

Maximum wattage	60
Supply voltage	220-240V
Number of lights	3
Lampholder type	E27
Light included	No
Length in cm	72
Height in cm	110
Weight in KG	2.8
Width in cm	10.5
Dimmable	Yes (not included)
Warranty	2 years
IP classification	IP20 (dustproof)
Colour	Nickel, White
Material	Glass
Area	Dining table
Style	Basic
Article number	Q15283

Shortening the Pendant Light

You can easily shorten the cord by pulling it through the ceiling cap. First, calculate at what height you want to hang the pendant light.

The average height for a pendant light above a dining table is approximately 150-160 cm, measured from the floor to the bottom of the shade. If the ceiling is 250 cm high, you will have 90 cm left for the lamp and cord. From these 90 centimetres, subtract the size of the lampshade to determine the length of the cord. Another guideline is that the distance between the table and the lamp should be 60-70 cm. Once you have determined the correct length, mark the desired length (measured from the bottom). Cut the cord to this line.

Pull the cord through until you see the length marking you have set. The excess cord can be coiled and secured with a piece of tape. This way, you can neatly tuck the excess cord into the ceiling cap.