Grey pendant light smoke glass, Barceno

This grey modern pendant light glass, Barceno, has the following properties:
• 110 cm high and 11 cm wide
• 1 x E27 lamp holder (excl. light bulb)
• Smoke glass
• Grey

Delivery time: 5-8 working days

RRP: €69.99

€69.99

The RRP is the price recommended by the manufacturer

webshop keurmerk

More items of this Product Range

Grey pendant light smoke glass, Barceno

€169

5-8 working days

Description

The grey modern pendant light Barceno is made of glass. The grey pendant light will be delivered without a light source with a E27 lamp holder. LED light sources with a maximum power of 60 watts can be installed in the fixture.

Dimmable pendant light

It is possible to dim the grey pendant light in two ways. You can choose a dimmable light source together with a LED dimmer (not included) or you can choose to dim the modern pendant light with a smart LED light bulb. A Smart WiFi light source is dimmable with an app on your phone or tablet, this way you do not need to install a LED dimmer.

Specifications

Maximum wattage	60
Supply voltage	220-240V
Number of lights	1
Lampholder type	E27
Light included	No
Height in cm	110
Weight in KG	1.4
Diameter in cm	11
Width in cm	11
Dimmable	Yes (not included)
Warranty	2 years
IP classification	IP20 (dustproof)
Colour	Grey, Nickel
Material	Glass, Steel
Area	Dining table
Style	Modern
Article number	Q15773

Shortening the Pendant Light

You can easily shorten the cord by pulling it through the ceiling cap. First, calculate at what height you want to hang the pendant light.

The average height for a pendant light above a dining table is approximately 150-160 cm, measured from the floor to the bottom of the shade. If the ceiling is 250 cm high, you will have 90 cm left for the lamp and cord. From these 90 centimetres, subtract the size of the lampshade to determine the length of the cord. Another guideline is that the distance between the table and the lamp should be 60-70 cm. Once you have determined the correct length, mark the desired length (measured from the bottom). Cut the cord to this line.

Pull the cord through until you see the length marking you have set. The excess cord can be coiled and secured with a piece of tape. This way, you can neatly tuck the excess cord into the ceiling cap.